Skip to content
Powrful Concrete Coatings

Guide

Are Coated Garage Floors Slippery?

How a flake floor gets its grip, what shark grip and gator grip add, and how to keep the floor clean.

Get your free quote

Free quotes

Free on-site quote, no obligation. We reply within one business day.

Prefer to talk? Call (507) 698-5737

Updated October 7, 2026 · 3 min read

The short answer

No. The coating itself is slip resistant, and we can add more texture, such as a shark grip or gator grip additive, for maximum grip. Cleaning is just as simple: sweep off sand and salt, then rinse with water.

Why a flake floor is not a slick floor

The decorative flake and clear topcoat leave a lightly textured, anti-skid surface rather than a smooth sheet of gloss. The floor looks glossy and still gives your feet something to hold, including when it is wet.

A close-up of a coated floor with blue-grey, grey and off-white flakes.
Up close, the flake and clear topcoat form a textured surface, not a smooth sheet.

Shark grip and gator grip: adding more texture

Where you want the most traction, we mix an anti-slip additive into the clear topcoat. It is a fine, micronized polymer grit, so it does not change how the floor looks. There are two levels:

  • Shark grip. The finer of the two: extra traction that is still comfortable underfoot.
  • Gator grip. The more aggressive texture, for maximum grip. It feels rougher underfoot and takes a little more effort to sweep and scrub.

The more texture you add, the more grip you get and the more you will feel it. Tell us how you use the space and we will recommend how much to add.

Get My Free Quote

Where extra grip matters most

  • Garages where rain, snow, or a wet car tracks water across the floor
  • Patios, walkways, and steps
  • Pool decks and hot tub surrounds
  • Commercial kitchens, shops, and entryways

How to clean a coated garage floor

The coating is a sealed, non-porous surface, so oil, salt, and grime wipe right up. Routine care is simple:

  1. 1

    Sweep

    Sweep off sand and salt.

  2. 2

    Rinse

    Rinse with water. A neoprene squeegee works great to clear the water off.

  3. 3

    Use a floor cleaner if you like

    Use your favorite floor cleaner. We recommend our polyaspartic floor cleaner, which we have available, but you can also use Simple Green, Pine-Sol, CLR, Dawn, or mineral spirits.

  4. 4

    Scrub stubborn spots

    Let the cleaner sit on the floor for 10 to 15 minutes, scrub with a scrub brush or stiff-bristle broom, then rinse for a revitalized floor.

  5. 5

    Power wash if you need to

    A power washer may be used to clean the floor. Please don't exceed 1,500 PSI.

What to avoid

  • Long-term exposure to bleach.
  • A power washer set above 1,500 PSI.
  • Acids and highly corrosive materials. Wipe up brake fluid and battery acid right away.
  • Rubber mats that mark, soft tires, and tire shine, which can stain or discolor any coating. Use non-marking mats.

Your written warranty documents list exactly what is and isn't covered, and we go through them with you.

Common questions

Is a polyurea garage floor slippery when wet?

The coating itself is slip resistant, and we can add more texture, such as a shark grip or gator grip additive, for maximum grip.

Will extra grip texture change the look of the floor?

No. The additive is a micronized polymer mixed into the clear topcoat, and it does not change how the floor looks.

Can I use bleach on a coated floor?

Avoid long-term exposure to bleach, and stay away from acids and highly corrosive materials. Water and a mild household cleaner handle everyday cleaning.

What can I clean a coated floor with?

Sweep off sand and salt and rinse with water. For more, use your favorite floor cleaner: we recommend our polyaspartic floor cleaner, or you can use Simple Green, Pine-Sol, CLR, Dawn, or mineral spirits.

Can I power wash a coated floor?

Yes. A power washer may be used to clean the floor. Please don't exceed 1,500 PSI.

How soon can I clean the floor after the install?

Wait until the floor reaches full chemical resistance, which takes about 72 hours of cure time. We confirm timing with you on install day.

Want to see it on your own floor? The quote is free, and there's no obligation.

Get My Free Quote

Ready for a floor you'll love?

Free, no-pressure on-site quotes. Installed in one business day and backed by a limited lifetime warranty.

CallFree Quote