Updated October 7, 2026 · 4 min read
The short answer
For most garages, polyurea is the stronger choice. Our polyurea system is 4x stronger than epoxy, it will not chip or peel, the clear topcoat is UV stable so it won't yellow in the sun, and the whole install is completed in one business day.
What is the difference between polyurea and epoxy?
Both are two-part coatings that bond to concrete and turn a bare, stained garage floor into a smooth, finished one. The difference is the chemistry, and it shows in how the floor holds up.
Epoxy has been used on garage floors for decades. Polyurea is newer, and it cures much faster. The floors we install are a three-layer system: a polyurea basecoat, decorative flake broadcast into it, and a clear polyaspartic topcoat, which is a type of polyurea, over the top.

Polyurea and epoxy side by side
| Feature | Our polyurea system | Typical epoxy |
|---|---|---|
| Strength | 4x stronger than epoxy | The standard polyurea is compared against |
| Chipping and peeling | Will not chip or peel | Can chip, scratch, or lift, especially under hot tires |
| Sunlight | UV-stable topcoat that won't yellow or fade | Many epoxies are not UV stable and can yellow where sun reaches the floor |
| Install time | Completed in one business day | Often spread over several days |
| Back in use | Walk on it within hours, park on it in about a day | Often several days before the car goes back in |
| Cleaning | Sealed, non-porous surface: oil, salt, and grime wipe right up | Cleans well while the coating is intact |
| Grip | Slip resistant, with shark grip or gator grip texture available | A smooth gloss can be slippery when wet unless grit is added |
| Warranty | Limited lifetime warranty on residential floors, backed by us and the manufacturer | Varies by product and installer |
Why polyurea suits a garage
A garage floor takes more punishment than almost any other surface in a home: hot tires, dripping oil, road salt, dropped tools, sun through the open door, and big swings in temperature. Here is how a polyurea system handles it.
- Strength. The system is 4x stronger than epoxy, so it stands up to daily traffic and heavy use.
- Adhesion. The basecoat bonds hard to properly prepared concrete, so the floor will not chip or peel.
- Sun. The polyaspartic clear topcoat is UV stable, so a floor that gets sunlight through the garage door won't yellow or fade.
- Cleanup. The sealed, non-porous surface is easy to keep clean.
- Speed. A rapid cure is what makes a one-business-day install possible.
The coating matters, but preparation matters more
Any coating is only as good as the surface it bonds to. Before anything goes down, we grind the slab with diamond tooling and dust-collecting vacuums, then fill minor cracks and pits. That clean, open concrete is what the basecoat grips.
Not every crack, pit, or damaged spot can be repaired, and concrete that holds too much moisture can cause trouble for any coating. We can take on most projects, but we need eyes on yours first. At your free on-site quote we look at your floor, test it for things like moisture and hardness, and tell you plainly what we can do.
Questions to ask any installer before you decide
Whichever coating you are leaning toward, these questions help you compare installers fairly:
- What is the topcoat made of, and is it UV stable?
- How do you prepare the concrete?
- How long until I can walk on the floor, and how long until I can park on it?
- How long will my garage be out of use?
- What does the warranty cover, who stands behind it, and can I read the written terms?
- Will you look at my floor in person before you commit to anything?
We are glad to answer every one of them at your quote.
So which one should you choose?
If you want a garage floor that will not chip or peel, won't yellow in the sun, and is finished in a day, polyurea is what we install, and we think it is the better choice for most garages. If you are weighing it against an epoxy installer, use the questions above to compare the two on the same terms.
Common questions
Is polyurea the same as polyaspartic?
Polyaspartic is a type of polyurea. Our system uses a polyurea basecoat and a polyaspartic clear topcoat, and the two are designed to work together.
Will a polyurea garage floor coating peel?
It is built not to. The basecoat bonds to properly prepared concrete, which is why we grind every slab first. The warranty documents you receive explain the coverage in writing.
How long does the install take?
Every install is completed in one business day. You can walk on the floor within hours and park on it in about a day.
Can you coat over my existing epoxy floor?
It depends on what is on the floor now and what shape it is in. We can take on most projects, but we need eyes on yours first. Tell us about your garage in the form at the top of the page and we look at it at your free on-site quote.
Want to see it on your own floor? The quote is free, and there's no obligation.
Get My Free Quote




